Most of my garden equipment serve one of two needs — they possibly dig or they cut. I sustain them appropriately, and commence by cleansing them.
My digging applications consist of shovels, hoes, rakes, pitchforks and handheld trowels, bulb planters and spades. Cleaning these applications is best liked on a sunny working day, when you can find a warm spot to use the hose and get your fingers wet. Even though a lot of a backyard tool’s reason is to dig in the dust, it can be not wise to keep that dust clinging to the device. Washing off any caked on dust is significant, so to sustain the integrity of the handles and the steel. I use a difficult bristled brush and a bucket of warm soapy water to clear my digging resources, laying them in the sun to dry.
Soon after cleaning, I address wood handles, the identical way I did with my scuffle hoe. I carefully sand the size of the take care of, smoothing any rough locations. I then use a rag to apply mineral oil to the wood. I use mineral oil simply because it truly is low cost and I’ve often obtained some on hand. Other types of oil function good, too, which include linseed oil.
The enterprise finishes of digging instruments will need to be taken care of, as very well. The steel heads of shovels and spades can become pitted and dulled overtime, and rust can construct up, far too. A rapid software of oil will go a extensive way to hold rust absent, and sharpening edges will help shovels, edgers and spades conduct greater.
While I have in no way experimented with this, one of the best tips I’ve noticed lately is storing your digging applications in a bucket of addressed sand. Simply fill a bucket with sand and pour some oil more than the top, allowing the oil penetrate into the sand. When you plunge your shovel or trowel into the sand, the grittiness can help to clean the steel while the oil deters rust buildup. I am confident this process would slice down on the sum of time you commit on yearly routine maintenance, too.